Maximum and minimum workplace temperatures
Temperatures in the workplace are governed by the Workplace (Health, Safety and Welfare) Regulations 1992, which oblige employers to provide a ‘reasonable’ temperature in the workplace.
The Workplace (Health, Safety and Welfare) Regulations 1992 Approved Code of Practice suggests a minimum temperature of 16°C, or 13°C if work involves severe physical effort. However, these are only guidelines, and the there is no recommended maximum temperature at all.
This is because the personal experience of temperature is a very complex one that cannot sensibly be reduced to a single figure. Instead it depends on the interaction of a number of factors such as:
- Air temperature.
- Air velocity.
- Radiant temperature.
- Relative humidity.
- Clothing.
- Metabolic heat.
- Wellbeing and health.
See Thermal comfort for more information.
Despite this, a number of attempts have been made to provide simple guidance for maximum workplace temperatures.
The Health and Safety Executive (HSE) have previously defined thermal comfort in the workplace, as '…roughly between 13°C and 30°C, with acceptable temperatures for more strenuous work activities concentrated towards the bottom end of the range, and more sedentary activities towards the higher end.'
In 2006, The Chartered Institute of Building Services Engineers (CIBSE) defined overheating as conditions when the comfortable internal temperature threshold of 28°C is surpassed for more than 1% of occupied (working) hours or where 25°C is surpassed for 5% of occupied (working) hours. Ref https://www.cibse.org/getattachment/Networks/Regions/South-Wales/South-Wales-Past-Presentations/TM52-The-limits-of-thermal-comfort-Cardiff.pdf.aspx
CIBSE have also defined 35°C as the internal temperature above which there is a significant danger of heat stress. However, they suggest that temperatures of more than 28°C for long periods will result in increased dissatisfaction and reduced productivity. Ref https://www.cibse.org/knowledge/knowledge-items/detail?id=a0q20000006obXh
In 2006, the Trades Union Congress (TUC) stated that it believed a maximum temperature of 30ºC should be set, or 27ºC for those doing strenuous work.
In July 2019, the Labour party proposed the same maximum workplace temperature of 30ºC, or 27ºC for those doing strenuous work. They tasked a proposed Royal Commission on Health and Safety at Work with bringing forward proposals along these lines.
[edit] Related articles on Designing Buildings
- BREEAM Thermal comfort.
- Cold stress.
- Construction work in hot weather.
- Excess cold.
- Healthy excursions outside the thermal comfort zone.
- Heat stress.
- Home Quality Mark high temperature reporting tool.
- Non-freezing cold injury NFCI.
- Operative temperature.
- Overheating.
- Preventing overheating.
- Temperature.
- Thermal comfort.
- Thermal comfort and wellbeing.
- Thermal pleasure in the built environment.
- Thermal indices.
Featured articles and news
What it is and how to use it.
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.
For the World Autism Awareness Month of April.
70+ experts appointed to public sector fire safety framework
The Fire Safety (FS2) Framework from LHC Procurement.
Project and programme management codes of practice
CIOB publications for built environment professionals.
The ECA Industry Awards 2024 now open !
Recognising the best in the electrotechnical industry.
Sustainable development concepts decade by decade.
The regenerative structural engineer
A call for design that will repair the natural world.
Buildings that mimic the restorative aspects found in nature.
CIAT publishes Principal Designer Competency Framework
For those considering applying for registration as a PD.
BSRIA Building Reg's guidance: The second staircase
An overview focusing on aspects which most affect the building services industry.
Design codes and pattern books
Harmonious proportions and golden sections.
Introducing or next Guest Editor Arun Baybars
Practising architect and design panel review member.